| TYPE OF USE
Specially recommended for gearboxes hard to shift and/or noisy
gearboxes. All mechanical transmission, synchronised or not
synchronised gearboxes, gearbox/differential, transfer gearbox and
hypoïd differentials without limited slip system operating under
shocks, heavy loads and low revolution speed or moderate loads and high
revolution speed.
PERFORMANCES
STANDARDS API GL4 and GL5 / MIL-L-2105D Extreme pressure lubricant
for an efficient anti wear protection reinforced with synthetic base
stocks for a better resistance at high temperature and longer life
time. Stays in 90 grade after KRL 20 hours shear test as requested by
SAE J306 Standard, July 1998 update Very high lubricating power which
decreases friction and wear. 90 grade at hot temperature to provide
outstanding oil film resistance at hot temperature and/or to reduce
transmission noise. Fluid at low temperature to allow easier gear
shifting when the gearbox is cold. Less effort required on the gear
lever to shift the gears. Suitable for any type of seal and yellow
material used in gearboxes design. Anti-corrosion, Anti-foam.
RECOMMENDATIONS
Oil change: According to manufacturers' requirements and adjust according to your own use.
PROPERTIES
Viscosity grade SAE J306 75W-90
Density at 15°C (59°F) ASTM D1298 0.868
Viscosity at 40°C (104°F) ASTM D445 107.8 mm²/s
Viscosity at 100°C (212°F) ASTM D445 16.7 mm²/s
Viscosity index VIE ASTM D2270 171
Flash point ASTM D92 200°C / 392°F
Pour point ASTM D97 -45°C / -49°F
| 
